- 12V
- 125Ah
- 720A
- Dimensions: 349×175×285 mm
Exide
Ref. BON-EXIDE-EG1353 Exide EG1353: commercial and agricultural vehicle battery 135Ah 12V 1000A
- Nominal voltage
- 12V
- Capacity, 20-hour rate
- 135Ah
- Cold cranking current (EN)
- 1000A
- Dimensions (mm)
- 514×218×210
- Battery technology
- Lead-acid
Shipping and lead times
- Mainland Spain1-2 working days · order before 17:00Free
- Express «14 horas»Next day before 16:00 · order before 17:30
- Balearic Islands1-3 working days
- Portugal3-4 working days
- Europe: FR, IT, DE, BE, NL1-5 working days
No shipping to the Canary Islands, Ceuta or Melilla.
Payment: Bank transferCash on delivery (+4 %, min. €4)
EU businesses with a VAT number: buy without VAT.
trucks and farm machinery? Try the Exide EG1353. Case size 514 × 218 × 210 mm.
- Voltage: 12V
- Amp-hours at C20: 135Ah
- Starting power (EN): 1000A
- Outer measurements: 514 × 218 × 210 mm
- Technology: Lead-acid
Summary: In a nutshell: Exide EG1353, a battery for trucks and farm machinery, rated 135Ah 12V 1000A. Size and polarity decide most swaps, and both are listed on this page.
Exide EG1353: what it is and who it suits
Agricultural contractors often reorder the Exide EG1353 before the busy season. Built as a lead-acid battery, it handles the steady vibration of farm tracks and building sites. Workshops pick baterias.online because post layout and cradle size are shown before the basket.
With 135Ah, capacity is typical of batteries for trucks and farm machinery. Hard starts are less likely with 1000A on tap.
Measurements, ratings and codes
Getting the best from the Exide EG1353
Tail lifts on delivery lorries pull heavy current dozens of times a day. Check the battery box drain holes are clear on lorries. Renewing just half of a series pair rarely ends well.
About the technology: lead-acid
Serviceable batteries have caps for checking the acid. Simple design makes flooded batteries easy to recycle. Most basic chargers already suit a wet-cell battery perfectly well.
Will the Exide EG1353 fit?
- ✓ Make room for 514 × 218 × 210 mm, including clearance above the posts.
- ✓ The capacity rating, 135Ah, should suit the consumers you run. Lots of electrical equipment calls for the higher end.
- ✓ Diesels and big engines need the full 1000A or more.
Your questions answered
Is the Exide EG1353 a heavy battery to fit?
39.8 kg is the listed weight. For larger batteries, a second pair of hands makes fitting safer.
What cranking current does the Exide EG1353 deliver?
The rated cranking current is 1000A to the EN standard. This is the key figure for cold weather starting.
Can I keep the Exide EG1353 on a shelf before fitting?
It is a good idea. All batteries lose some charge on the shelf, so a top-up before fitting helps.
Batteries with the same format
Looking to compare? Each of these has the dimensions and polarity of the Exide EG1353.
Deta DG1353Fulmen FG1353Tudor TG1353Varta J5Varta K4
See also
Happy with the fit? Ordering the Exide EG1353 at baterias.online is quick. A minute spent comparing the label of your old battery avoids most mistakes.
Specifications
| Brand | Exide |
|---|---|
| Product line | EXIDE START PRO |
| Used for | Trucks and farm machinery |
| Battery technology | Lead-acid |
| Nominal voltage | 12V |
| Capacity, 20-hour rate | 135Ah |
| Cold cranking current (EN) | 1000A |
| Length | 514 mm |
| Width | 218 mm |
| Height | 210 mm |
| Weight | 39.8 kg |
| Layout code | 3 |
Documents
4 other products in the same category
- 12V
- 180Ah
- 1000A
- Dimensions: 513×223×223 mm
- 12V
- 125Ah
- 760A
- Dimensions: 349×175×285 mm
- 12V
- 235Ah
- 1300A
- Dimensions: 518×274×240 mm