Fulbat FP6-1.2: sealed standby cell for emergency power 1.2Ah 6V

In short: One code, one battery: Fulbat FP6-1.2, 1.2Ah 6V, for UPS and standby systems. Matching technology keeps the charging system happy.

Fitting and everyday care

Gate motors and access systems rely on backup batteries when the mains drops. Check the charging voltage setting on the equipment. Batteries left in service too long often fail without warning.

Fulbat FP6-1.2 data sheet

AGM: how it works

Open up an AGM battery in your imagination and you would find the acid soaked into thin glass-fibre sheets squeezed against each plate. Recharging is quick with AGM, handy for vehicles that do short trips. Charge an AGM battery on a programme made for AGM, not a generic setting.

Questions and answers

Fulbat FP6-1.2: what it is and who it suits

Electricians often order the Fulbat FP6-1.2 during routine maintenance visits. Sealed construction lets it sit in a cabinet for years. Searching by exact code keeps a UPS string matched.

Among batteries for UPS and standby systems, 1.2Ah is at the smaller end. 0.29 kg is a modest weight for what it stores.

Explore more

Got the old battery's label in front of you? Compare it once more, then order online at baterias.online. Keep the radio code handy before disconnecting the old battery.

• Compare alternatives for UPS and standby systems
• More from Fulbat

Quick compatibility checklist

• ✓ A different chemistry from AGM may need system changes.
• ✓ Make room for 97 × 24 × 57.5 mm, including clearance above the posts.
• ✓ Orientation matters: positive on the left-hand side on this model. Stand facing the long side with the terminals nearest you to compare.