Fulbat FP6-3.2 | keeps alarms, servers and exit lights running | 3.2Ah 6V

Looking for Fulbat FP6-3.2? A 3.2Ah 6V battery for UPS and standby systems. Voltage 6V.

  • Volts: 6V
  • Capacity, 20-hour rate (C20): 3.2Ah
  • Dimensions (L × W × H): 134 × 34 × 66 mm
  • Chemistry: AGM
Share

Notify me when available

Interested in this product? Drop us an email and we will let you know when it's available for order.

6VVolts
3.2AhCapacity, 20-hour rate (C20)
0.67 kgBattery weight

Summary: Battery Fulbat FP6-3.2 at a glance: 3.2Ah 6V, intended for UPS and standby systems. Check the terminal side, as this one has the positive on the left-hand side.

Fulbat FP6-3.2 data sheet

ManufacturerFulbat
ReferenceFP6-3.2
SeriesFULBAT FP General Purpose
Used forUPS and standby systems
Volts6V
Capacity, 20-hour rate (C20)3.2Ah
ChemistryAGM
Dimensions (L × W × H)134 × 34 × 66 mm
Battery weight0.67 kg
Polaritypositive on the left-hand side
ConnectorsT1

Fulbat FP6-3.2 in everyday use

Gate motors and access systems rely on backup batteries when the mains drops. Disconnect the load before working on a UPS without hot-swap. Mixing old and new batteries in one UPS cuts runtime and harms the new blocks.

About the Fulbat FP6-3.2

Server cabinets, security panels and exit lights often rely on a Fulbat FP6-3.2. Whether a standby block fits comes down to four things, all listed below: volts, amp-hours, size and connector style. The Fulbat FP6-3.2 page at baterias.online lists the figures to check before the swap.

3.2Ah makes it a smaller battery, good for light electrical loads. 0.67 kg makes it one of the lighter options for its capacity.

Questions buyers ask about the Fulbat FP6-3.2

How big and heavy is this Fulbat battery?

At 134 × 34 × 66 mm, measure the tray or compartment carefully. Plan the lift too: 0.67 kg is heavier than it looks.

Is the Fulbat FP6-3.2 suitable for a 6V system?

It is a 6V battery with a capacity of 3.2Ah. In banks of several units, connect only identical batteries bought at the same time.

Is the plus post on the correct side for my car?

Polarity: positive on the left-hand side. Face the long side with the posts nearest you to compare.

Five checks for a perfect fit

  • ✓ Technology to match: AGM. Moving to a different chemistry may need settings changed in your system.
  • ✓ Measure the space available: the case takes up 134 × 34 × 66 mm, and a few millimetres too many can stop the hold-down from closing.
  • ✓ Orientation matters: positive on the left-hand side on this model. Stand facing the long side with the terminals nearest you to compare.

More options

Finished comparing? Placing your order online takes a couple of minutes. Measuring the space before ordering avoids a battery that will not sit flat.

How AGM batteries work and how to look after them

Gas produced during charging recombines inside an AGM battery, so it loses almost no water. Cold starts are easier with AGM thanks to strong current delivery. Do not mix AGM and flooded batteries in one bank.

  • Brand
  • Reference
    BON-FULBAT-FP6-3.2
  • MPN
    FP6-3.2

  • Brand
    Fulbat
  • Product line
    FULBAT FP General Purpose
  • Used for
    UPS and standby systems
  • Battery technology
    AGM
  • Nominal voltage
    6V
  • Capacity, 20-hour rate
    3.2Ah
  • Length
    134 mm
  • Width
    34 mm
  • Height
    66 mm
  • Weight
    0.67 kg
  • Terminal polarity
    Positive on the left-hand side
  • Terminals
    T1

Datasheet FP6-3.2

Datasheet Fulbat FP6-3.2

Download (698.89KB)
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)

Comments (0)

No customer reviews for the moment.

4 other products in the same category

Viewed products

Loading...
Back to top