Ritar EV6-225 | forklifts, buggies, lifts and scrubber-dryers | 225Ah 6V 1035A
Ritar EV6-225 for traction and industrial equipment · listed by code. Voltage 6V.
- Voltage: 6V
- Capacity, 20-hour rate (C20): 225Ah
- Cold cranking amps: 1035A
- Size L × W × H: 260 × 180 × 282 mm
- Chemistry: AGM
At a glance: The battery on this page is the Ritar EV6-225, aimed at traction and industrial equipment. Nominal voltage is 6V, the same as most equipment of this kind.
Using it day to day: practical tips
Winter in an unheated warehouse cuts traction battery capacity. Renew the whole set of blocks together with identical units. A machine that no longer completes a shift usually has worn batteries.
Specifications table
| Manufacturer | Ritar |
| Reference | EV6-225 |
| Range | RITAR EV |
| Used for | traction and industrial equipment |
| Voltage | 6V |
| Capacity, 20-hour rate (C20) | 225Ah |
| Cold cranking amps | 1035A |
| Chemistry | AGM |
| Size L × W × H | 260 × 180 × 282 mm |
| Battery weight | 32 kg |
| Terminals | F14(M8)/F22(M8) |
About the technology: AGM
Glass-mat batteries are sealed, with small valves that only open if pressure builds up. AGM suits traction and industrial equipment where a maintenance-free battery makes life easier. Check the charging voltage limit printed on an AGM label.
Same size and layout
If you prefer another make, these fit the same space with the same terminal side.
Fullriver EGL220-6Trojan T-125Trojan T-605
Common questions about the Ritar EV6-225
Is the Ritar EV6-225 strong enough for a diesel engine?
With 1035A, it suits vehicles whose maker specifies that value or less. Cold climates benefit from extra.
Can I keep the Ritar EV6-225 on a shelf before fitting?
It is a good idea. All batteries lose some charge on the shelf, so a top-up before fitting helps.
Dimensions and weight of this model?
At 260 × 180 × 282 mm and 32 kg, it needs a tray of that size and a careful lift.
Is this enough battery for a cold start?
Rated 1035A for cold starts and 225Ah in capacity, it will suit engines whose manufacturer specifies equal or lower values. Big diesels in cold climates benefit from extra margin.
Ritar EV6-225 for traction and industrial equipment
If the maintenance sheet lists the Ritar EV6-225, this page has the details. Ratings of 225Ah 6V 1035A should match the machine's documentation. Maintenance teams choose baterias.online because voltage and size are always shown.
225Ah is right in the usual range for traction and industrial equipment.
More options
Prefer to compare first? The links below lead to other options for traction and industrial equipment on baterias.online. Measuring the space before ordering avoids a battery that will not sit flat.
Before you order: a quick checklist
- ✓ Terminals: F14(M8)/F22(M8). Match them with your cable ends.
- ✓ Built with AGM technology: if your vehicle or system was set up for another chemistry, check the charging settings first.
- ✓ Measure the space available: the case takes up 260 × 180 × 282 mm, and a few millimetres too many can stop the hold-down from closing.
-
BrandRitar
-
Product lineRITAR EV
-
Used forTraction and industrial equipment
-
Battery technologyAGM
-
Nominal voltage6V
-
Capacity, 20-hour rate225Ah
-
Cold cranking current (EN)1035A
-
Length260 mm
-
Width180 mm
-
Height282 mm
-
Weight32 kg
-
TerminalsF14(M8)/F22(M8)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent