Ritar HT12-200 · 212Ah 12V · backup battery for UPS, alarm panels and telecom racks

Quick answer: Battery Ritar HT12-200 at a glance: 212Ah 12V, intended for UPS and standby systems. Get the size and terminal side right and you are most of the way there.

Ritar HT12-200: what it is and who it suits

Office tech teams usually come looking for the Ritar HT12-200 when the UPS starts beeping. Sealed construction lets it sit in a cabinet for years. Facility managers buy batteries online for planned replacement cycles.

At 212Ah, there is plenty in reserve compared with most batteries for UPS and standby systems.

Make sure it fits your vehicle or equipment

• ✓ Outside dimensions are 522 × 240 × 224 mm. Run a tape measure over your tray or compartment, including the height under the bonnet or lid.
• ✓ Rated 212Ah: check that the charger or alternator in your system can refill a battery of that capacity in reasonable time.
• ✓ Photograph your old terminals and compare with F16(M8) / F10(M8).

Full specifications of the Ritar HT12-200

Common questions about the Ritar HT12-200

About the technology: AGM

Compression inside the case is part of what makes glass-mat batteries so sturdy. Ambulances and police cars use AGM for their heavy electrical loads. If the original was AGM, the replacement should be AGM too.

Same size and layout

Cannot find the Ritar HT12-200 you want? These share the same size and terminal layout.

Q-Battery 12LS-200Long HTP200-12NLong WPL200-12BNLong WPL200-12NLong WPL230-12N

Explore more

Finished comparing? Placing your order online takes a couple of minutes. Have a spanner and a wire brush ready on the day.

• Other batteries for UPS and standby systems
• More from Ritar

Using it day to day: practical tips

Gate motors and access systems rely on backup batteries when the mains drops. Check whether the UPS allows hot-swapping before pulling batteries out. Mixing old and new batteries in one UPS cuts runtime and harms the new blocks.